Compare

Dashcam AI vs. a LiDAR road survey

Two ways to build a road asset inventory. One is a precise snapshot. The other is a record that keeps up with the road.

The short answer

A mobile LiDAR survey and passive dashcam collection answer different questions. LiDAR gives a very precise picture of a road network on one day. Dashcam AI gives a slightly less dense picture that never goes stale.

For day-to-day maintenance — which pothole, which sign, which crew, tomorrow — freshness matters more than point density. That is the case Arterial is built for.

Side by side

QuestionLiDAR surveyArterial
How data is collectedA dedicated survey vehicle driven on purpose, route by route.Passively, by a windshield camera on vehicles already on the road.
RefreshTypically repeated every three to five years because of cost.About 80% of a jurisdiction every two weeks.
MeasurementSurvey-grade point cloud.E-LiDAR depth projection accurate to under 1 cm on every item.
Staff effortProcurement, scheduling, and processing a large deliverable.A camera install of about fifteen minutes per vehicle.
What you receiveA snapshot of the network on the day it was driven.A living inventory, ranked by urgency to your standards.

Where a LiDAR survey fits

A dedicated survey is the right tool when you need a one-time, engineering-grade model: a corridor redesign, a clearance study, or a baseline for a capital project.

Its limit is repetition. Survey-grade collection is costly enough that most agencies repeat it only every three to five years, and the record drifts from the road in between.

Where passive dashcam collection fits

Passive collection is the right tool when the question changes weekly. Because the camera rides on vehicles that are already driving, every pass refreshes the inventory and shows what changed: a pothole that deepened, a sign that went missing, a hydrant that was struck.

Arterial pairs that refresh rate with measurement. E-LiDAR reconstructs depth from the camera feed, so records carry real dimensions rather than just a photo and a pin.

Using both

The two are not exclusive. An agency with an existing LiDAR baseline can use passive collection to keep it current between surveys, and to decide when — or whether — the next full survey is needed.

Common questions

Is dashcam AI as accurate as LiDAR?
For the measurements maintenance teams act on, it is close. Arterial’s E-LiDAR depth projection is accurate to under one centimeter, and detection accuracy is above 97%. A dedicated LiDAR survey still produces a denser point cloud for engineering design.
How often should a road network be surveyed?
Conditions change faster than a multi-year survey cycle can track. Passive collection refreshes roughly 80% of a jurisdiction every two weeks, which is frequent enough to catch a hazard while the repair is still small.
Do we need special vehicles for dashcam collection?
No. Arterial uses vehicles your agency already operates. The ARTIE windshield camera installs in about fifteen minutes and collection needs nothing from the driver.

We know which signs you’re missing.
Do you?

See the system in action and explore what it could do for your jurisdiction. Our demos are always informative, never sales.

Public works · DOTs · Right-of-way agencies