Guide

Automated road assessment software, explained

What it is, the four ways the data gets collected, and the questions that separate one system from another.

What automated road assessment software is

Automated road assessment software uses cameras and computer vision to find and record what is on and beside a road — potholes, signs, markings, hydrants, manholes — without a person stopping to log each one. The output is a map of assets and problems, each with a location, a type and a condition.

It replaces the two things most agencies rely on today: crews driving around to look, and residents reporting problems after they have already hit them.

Four ways the data gets collected

Most of the difference between systems comes down to who drives and how often. There are four common approaches.

  • Dedicated survey vehicles. A specialist van with LiDAR or laser profilers drives the network on purpose. Precise, and costly enough that most agencies repeat it only every three to five years.
  • Staff-driven camera surveys. A smartphone or camera is mounted in a municipal vehicle and staff drive routes to record the network. vialytics is one example of this approach.
  • Crowdsourced imagery. Footage from dashcams in third-party commercial vehicles is analyzed, so the agency manages no hardware but also does not choose where or when vehicles drive. Blyncsy, part of Bentley Systems, is one example.
  • Passive cameras on the agency’s own fleet. Cameras ride on vehicles the agency already sends out, and collection happens during normal work with nothing asked of the driver. This is how Arterial works.

The four approaches side by side

ApproachWho drivesTypical refreshWhat the agency manages
Dedicated survey vehicleA contractor, on purposeEvery few yearsA procurement and a large deliverable
Staff-driven camera surveyAgency staff, on routesAs often as staff drive themDevices and survey routes
Crowdsourced imageryThird-party vehiclesDepends on where they driveNo hardware
Passive fleet cameras (Arterial)Your fleet, during normal workAbout 80% every two weeksA 15-minute camera install

Descriptions of other approaches are general and were last checked in November 2026. Confirm specifics with each vendor.

What to ask before choosing one

  • What exactly is detected, and is it measured? A photo and a pin is different from a pothole with a depth and an area.
  • How often does the record refresh, and across how much of the network?
  • Is the data filtered to your right-of-way, or will you receive detections on roads you do not maintain?
  • How is urgency decided, and can it follow your standards rather than a fixed score?
  • Which GIS and asset management systems does it export to?
  • Who owns the data, and what happens to people and license plates in the imagery?
  • How much staff time does collection and data cleanup take each week?

Where Arterial fits

Arterial is the fourth approach. ARTIE, a low-cost windshield camera, installs in about fifteen minutes on vehicles your agency already drives. Collection is passive and refreshes roughly 80% of a jurisdiction every two weeks.

Detections are measured with E-LiDAR depth projection accurate to under one centimeter, filtered to your right-of-way, and ranked by urgency according to your standards. Records export into the systems you already run, and the data stays yours.

Common questions

What is automated road assessment software?
It is software that uses cameras and computer vision to detect, locate and record road assets and defects automatically, producing a mapped inventory with a condition for each item instead of a manual survey.
How is it different from a pavement management system?
A pavement management system plans treatments and budgets from condition data. Automated assessment software supplies the data. Arterial exports its records into the GIS and asset management systems an agency already runs rather than replacing them.
Do we need new vehicles or dedicated staff?
Not with passive collection. Arterial uses vehicles your agency already operates, and collection happens during normal routes with nothing required of the driver.
How often should roads be assessed?
Conditions change faster than a multi-year survey cycle can track. Passive collection refreshes roughly 80% of a jurisdiction every two weeks, which is frequent enough to catch a hazard while the repair is still small.

We know which signs you’re missing.
Do you?

See the system in action and explore what it could do for your jurisdiction. Our demos are always informative, never sales.

Public works · DOTs · Right-of-way agencies